Let's look at the main reasons why your laptop won't turn on and what you can do now.

It should be immediately clarified that there can be a lot of reasons for failure and they will be of both hardware and software nature. We will check everything in order and look for our case. If anything, contact a workshop in your city.

This article is suitable for all brands that produce laptops on Windows 10/8/7: ASUS, Acer, Lenovo, HP, Dell, MSI, Toshiba, Samsung and others. We are not responsible for your actions.

The laptop does not turn on and shows no signs of life

Often such problems are related to nutrition. The first thing you need to do is connect the laptop to the power supply to check for voltage in the outlet. The adapters are equipped with a power light, which indicates its functionality. The laptop has a light that lights up when it is plugged in or the battery is charging.

Most often, the reason is a power supply that does not work or is not functioning properly (here you need to try a similar working one), due to the presence of bad contacts in the connectors, kinked or broken wires. Therefore, we look and draw conclusions at what stage the voltage disappears.

To avoid problems with the power connector, it is recommended to first insert the power plug into the laptop, and then only the power cord into the outlet. This will eliminate the possibility of a short-term spark occurring when connecting the plug, which could damage the contacts.

If the laptop does not turn on, but everything is “on”, then the problem may not only lie in the power supply. You should remove the battery and connect the device again without it, then after 10 minutes put the battery back. Also turn off all external connected devices, you can also turn off the Wi-Fi adapter if the design allows.

If everything works, then return the devices one by one. This is how the reason is determined.

Hard drive is faulty

If the hard drive fails, the laptop can be turned on, but before the Windows splash screen is displayed, it freezes. In some cases, a message about a HDD error is displayed, for example, information that the disk is not a system one.

In any case, the user still has the opportunity to enter the BIOS. There you can check whether the settings are correct and whether the hard drive is detected. If the hard drive is visible, then the system can be started from a bootable USB flash drive or disk to test it.

Damage to chipset and video card chips

Various laptop components can fail. The causes of failure may be damage due to impact, overheating, etc.

The most common problems that arise when turning on a laptop are:

• Video card.
• North Bridge.
• South Bridge.

When a laptop breaks down, its behavior may vary. If the video card fails, then there is no picture, but the fan will function and Windows may even boot, making appropriate sounds. If one of the bridges breaks, the device will stop before loading the OS or will not turn on at all.

In this case, it is almost impossible to determine the cause yourself. At home, attempting repairs can damage the device, so it is better to contact a service center.

Other reasons

In practice, a malfunction can occur in a number of cases:

• Error in Windows operation.
• Overheat.
• Broken BIOS firmware.
• Memory or processor damage.

If the laptop beeps when turned on, this indicates problems with the RAM or overheating. If you have a little experience, you can independently identify the problems and why this happened.

First you need to remove the dust. If the failure remains, then the memory modules should be replaced with known good ones.

The problem with broken BIOS firmware appears after an incorrect update. Errors often occur during BIOS configuration. It is quite easy to solve this problem yourself. You should go to the SETUP menu, load the default settings, for example, select the Load Setup Defaults function.

Errors may appear in Windows, resulting in the operating system not starting. It is necessary to determine their cause and solve the problem. Alternatively, you can reinstall the OS or restore the installed one.

Often the laptop does not start due to power problems. After pressing the power button, the power button lights up, but then nothing happens. The cause must be found and eliminated.

The laptop stops turning on due to the following typical actions:

• Update.
• Cleaning from dust.

To troubleshoot problems, you can replace the battery:

After cleaning

After cleaning, the laptop may not turn on. In this case, the fan may start or make a squeaking noise. The indicators may flash on some models.

The process of cleaning a laptop involves disassembling it. First, you need to re-disassemble the device and check the connection of all components and the installation of the cooling system. It is important to pay attention to the thermal paste.

If RAM modules were removed during cleaning, you must try to remove them again, clean the contacts and reinstall them. It is important to check whether the laptop starts with the optical drive and hard drive disconnected.

When disassembling again, you need to pay attention to the lid opening sensor. If the assembly is not carried out very carefully, then it may not be in the right place.

If the above tips do not help, then you should turn to professionals. There is a possibility that parts were damaged by static electricity during disassembly or some other problem occurred.

After update

When updating, problems may occur. When updates are installed incorrectly, the laptop stops turning on. The user can install a new version of drivers, BIOS or OS patches.

The most difficult case is the inability to start the device after updating the BIOS. This happens when the user interferes with the process, for example, by turning off or restarting the computer while updating or using unofficial firmware.

It wouldn't hurt to reset the settings to default. To do this, you need to remove the battery for a few minutes or close the corresponding jumper on the system board. In practice, this is not always possible to resolve the problem.

If the problem started after updating Windows or drivers, you should simply roll back to the previous restore point using safe mode. Restoring the operating system or returning to the state may also help, if the model supports such a function.

After overheating

Modern laptops generate a lot of heat during operation. If the cooling system is faulty or there is heavy dust, overheating occurs, which can cause some parts to break.

The following parts may fail due to overheating:

• South and north bridges.
• Hard drive.
• Video card.
• CPU.

Spontaneous shutdowns

In some situations, the laptop may turn on and function normally for a while. Then it switches off spontaneously. Main causes of failure:

• Faulty parts.
• Software errors.
• Overheat.

The most common reason for laptops to turn off is overheating, which can further lead to damage to the product. To avoid this, you should regularly remove dust and change the thermal conductive paste.

Quite often, parts malfunction due to overheating. If you do not carry out regular cleanings, this probability increases significantly.

Viruses can harm the correct operation of the system. As a result, the device will turn itself off. You can solve the issue using a special utility from the Kaspersky Lab website or Doctor Web, performing a full scan and removing threats.

For software errors, you need to find the cause using the code that is displayed on the screen at the time of the failure. Then the problematic application needs to be removed or updated.

Cannot start from boot device

When loading Windows in English, various messages may be displayed, for example, “Error loading operating system.” The first step is to remove the disk from the drive, all flash drives and reboot the device. If this does not solve the issue, then the reason is a software problem with the hard drive or a hardware problem.

The most accessible method of restoring functionality is to reinstall Windows. If this helped, then the reason was at the software level.

Another possible option is when Windows starts loading, but then the laptop reboots itself, showing errors on a blue or black screen. Here, hardware or software failures may also be the cause.

The surest way to check this is to reinstall the OS. An easy way to check is to start the system from a bootable USB flash drive. If the device does not start, then it should be taken in for repair.

It is impossible to imagine our modern life without a laptop computer, how convenient and necessary it has become. We can use it at any time and in any place convenient for us. But problems also happen when Acer laptop won't turn on. It all depends on the fact that it is thin, delicate and transportable, but careless actions will only harm it.

If you have no idea why he beeps and refuses to work from the battery or directly from the power source, then contact the gsmmoscow service center. Our technicians will quickly and efficiently fix all problems. Reasons Breakdowns, as our experience shows, in most cases occur due to improper operation and negligence. To begin with, you can, if you wish, try to determine for yourself Why laptop doesn't work. Check if you are using the original power adapter that came with your Acer. It is also necessary to remove additional USB devices and drives. Now try to turn it on again, if the Acer laptop is working properly, then these tips will help.

You tried, but still Laptop won't turn on? Then, most likely, it is faulty and you should contact the service for professional help.

Reasons why your Acer laptop won't turn on.

Firstly, you must treat the mini-computer with care, because shocks, strong bangs, falls, and moisture can seriously damage the parts and the Acer laptop may simply fail completely. As a result, after such manipulations, Laptop won't turn on.

So, the video chip fails, which naturally needs to be replaced.

If the laptop simply does not charge, then the problem may be in the power supply, which will become clear after checking.

The north and south bridges are also replaced when they do not work.

There is one more elementary problem in Acer– this is a broken power button, it needs to be repaired in order to continue using it.

Due to a broken power connector, you will not be able to use the device unless it is repaired.

The laptop does not turn on through the contact group of the connector, which may be damaged; to resume its operation, you need to contact specialists to have everything restored.

Problems can also arise from the motherboard, which could be damaged.

So what if the lights don't light up, nothing works, then you should listen to the advice of professional help, diagnosis and get it checked as quickly as possible.

Acer laptop won't turn on? Want to know how long the repair will take?

Your Laptop turned off and won't turn on, you have tried all the measures, then visit a specialist to diagnose possible problems. The diagnosis takes approximately one hour. You will find out for free, for example, why indicators do not light up.

If you are interested in knowing how long the repair will take, then this information is for you. Each type of parts replacement is complicated in its own way, and so is repair. The presence of the required spare part and the complexity of the model play an important role. If your laptop stopped turning on due to a video chip malfunction, then its usual replacement takes about 4 hours. The board repair you need can be done in 2 hours. If the light doesn't light up, and you know that the reason is the power connector, then we will replace it in about an hour. IN Acer Aspire For example, replacing the south and north bridges lasts from 4 hours.

The professionals at the ZhSMMOSC center will bring your Acer laptop computer back to life efficiently and reliably.

A laptop, just like anything else, can fail, but if it still won’t boot, then it can really fray your nerves.

I would advise, first of all, to make sure that the devices are connected and installed correctly:

• Is the battery installed in the laptop correctly?
• is it charged?
• Is the power supply corrected, is the power cord functional.

If everything is normal, but the device does not want to turn on, it is necessary to analyze what previously carried out actions with it could have caused it to fail: and mechanical damage. If this has not happened, then you need to observe how the computer behaves when starting up and work according to the situation.

Possible problems and solutions.

Below, you can see all the main reasons why a laptop may not boot, and also diagnose your laptop yourself. I hope the tips below help you.

System reinstallation required.

The computer seemed to start up, the lights came on, a splash screen appeared on the screen, but when the Windows operating system loaded, the laptop froze and rebooted. This situation is the most common. If this is related to the software part, then it is not at all difficult to cure it, I advise immediately

This can be done either from a boot disk or from a flash drive. But an equally common cause of freezing is a hard drive failure. In this case, you will need to buy a new hard drive and install it. It's not at all difficult to do this. (Read how to do this)

Problems with BIOS.

The laptop starts up, the indicators light up, but after 1-2 seconds the device turns off. Here, most likely, a physical breakdown occurred; in this case, reinstalling Windows will not help. Such symptoms indicate that the BIOS firmware has not been completed correctly. You can’t handle this yourself; it’s best to contact a service center, where a specialist using a programmer can completely restore the BIOS. Naturally, you can try to restore the BIOS yourself, but the center will install the latest firmware for the required model.

Laptop hardware cleaning is required.

If you are sure that the boot program is not damaged, then the problem is in the chip on it. There are many reasons for this: incorrect connection of a faulty device via USB, overheating of the processor, short circuit in bridges or power circuits, etc. I would like to suggest conducting and, at the same time, inspecting all the microcircuits to determine their functionality

Hardware faults.

If the laptop is turned on, but the monitor does not turn on, you need to try connecting to a regular TV. If everything works, then the matrix needs to be replaced. If, when you turn it on to the monitor or TV, no picture is shown, then you need

Blue screen of death.

Is there a blue screen on the device and nothing starts? This blue color is called the death monitor Bsod.

Although the name is scary, there are also various medicines here, but the main thing here is to find out why this happened? You can find out more. On my own, I can add that 90% of problems that cause damage to a laptop appear only due to the user’s fault. Remember one thing: you can replace the main devices, replace thermal paste, and clean the laptop yourself, but if you are not confident in your abilities, then take your friend to a service center or call a technician at home (if possible) so as not to completely break the device.

More detailed article “Laptop won’t boot. What to do?" located In the video below, you can see how to correctly diagnose a laptop if it does not boot. Good luck!

Sometimes there is such a problem that your laptop stops working and you cannot understand what is the reason. Well, this is quite unpleasant. Especially if your laptop serves as a workstation. In this article we will tell you what troubles could happen to your laptop.

Different problems may concern two areas: hardware And software. Hardware problems are when any part of the laptop fails. Software problems are problems that affect the software part of the system. For example, incorrect BIOS, OS or utilities settings.

First, you need to understand which area your problem falls into. For example, if your laptop won't even start, then the problem is definitely a hardware issue. However, if your unit can get to the BIOS or even before the operating system starts, then there is a possibility that the problem is of a software nature.

Here we need to perform a power test. Connect the power supply to the laptop and be sure to check your outlet. There should be a small diode on your device, which indicates that it is connected to the network or the battery is starting to charge.

It is possible that the problem lies in the power supply, damaged connectors or wires. Check this entire system thoroughly. In order to prevent various breakdowns, try to first power up the laptop and then plug it into a power outlet.

However, if you are convinced and sure that the problem is not in your power supply, then perhaps it is in the batteries. Reconnect the battery. You can also try turning off external devices. After that, turn on your laptop and gradually turn on the disabled things. This will make it possible to determine what the problem is.

Loud noise from the cooler, but the screen shows no signs of life

There is a possibility that your monitor's backlight has simply stopped working. Try activating it with a key combination Fn+F2. If it doesn’t help, then you can add another monitor to the laptop. Using it, you can determine whether the problem is a non-working screen.

Another possible problem is the video card. Quite often we forget to do such basic things as cleaning our laptop. If you are a fairly inexperienced user and have only recently begun to get acquainted with such a thing as a laptop, then know that it needs to be cleaned regularly. Also be sure to monitor the temperature.

There are, of course, more serious problems. For example, problems with the central processor, RAM, BIOS, etc.

Starts up, displays a splash screen or displays a message and freezes

The root of this problem is most likely the BIOS, or more precisely, its settings. Try to set the settings to default. This function can be located in different places in different BIOSes, but its name usually looks something like this - Load BIOS Defaults.

It is also possible that when loading the system you saw the message “Press F1 to continue”. This problem usually occurs when the battery on the motherboard is low (not the main battery), the wrong time is set, or the BIOS settings are lost. To change the battery, you must contact a service center.

Another problem may be with the hard drive. It is possible to determine the correct operation of a hard drive by its sound. When starting up, the hard drive makes a couple of crackling noises, but when everything is not in order with it, there are many more crackling noises and everything freezes.

There is also a problem with RAM. If possible, disconnect the RAM and clean its contacts. If you have more than one strip, then try disabling one of them.

Constant reboots or shutdowns

Most likely this is a hardware problem. Most likely there is a short circuit that overheats the south bridge. In most cases, this occurs due to a breakdown via USB.

As mentioned above, cleaning your laptop is a must. Due to a lot of dust, your CPU can become quite hot. In this case, you may hear a loud hum from the cooler and experience constant reboots.

Cannot start from boot disk

With this error, you may receive messages like ". Try removing the flash drive from the laptop, remove the disk from the drive and reboot. If this does not help, you can try reinstalling the operating system. Well, if this does not solve the problem, then you will have to take your “friend” to the service center.

Found a typo? Select the text and press Ctrl + Enter

The laptop turns on but does not boot - what should I do? This is a natural question that, along with a feeling of approaching panic, arises in everyone who finds themselves in a similar situation. To begin with, you should calm down, put aside panic and try to start it again: disconnect from the network and after a couple of seconds connect the power again. If the laptop does not boot after rebooting, then the problem may be serious. A variety of parts can fail:

• Power unit;
• Video card;
• RAM;
• Winchester.

But there are also less terrible problems:

• BIOS failure;
• Software malfunction;
• Accumulation of dust;
• Lack of power;
• Disconnecting contacts in bridges.

The easiest way to accurately determine the cause and eliminate it is to contact. But you can also go the hard way: do everything yourself. And the first step towards this can be loading Windows from a flash drive. Although even here you can fail.

Laptop won't boot from flash drive

If you are trying to revive the device using a USB drive, but it does not work, do not rush to despair. Try rebooting your laptop or using a different port for connection. If even after this the laptop does not boot from the flash drive, then most likely the BIOS simply does not include such a function for booting from a USB drive. Check its presence: go to the BIOS and select Advanced Features there, and in the window that appears, Boot Sequence. If the system sees the flash drive, it will be in the list that appears.

To activate the download, move the line with the USB device to the first place in the list and press F12 on the keyboard. If after this the laptop turns on, but does not boot, then pay attention to the sounds: is there any extraneous noise when turning on?

Laptop won't boot and beeps

When loading, any sounds the device makes are better than nothing. Silence may indicate the complete and final death of the laptop. Usually, if a laptop beeps but does not boot, the sounds are made by the BIOS and from them you can determine where exactly the problem occurred. Let's look at the set of sounds in Award BIOS. AMI Bios has a similar, but somewhat stripped down version.

A short single signal indicates that the system is working properly. After this, normal loading should continue. If the laptop does not boot, what should I do? Nothing special: contact a laptop repair specialist because the video card in your device has failed. This is indicated by a single signal from the system.

Two short beeps are not a clear, but encouraging sign. This is how the system talks about disconnected cables, contacts and other minor problems. To quickly eliminate them, you need to contact computer repair in Krasnodar.

Three beeps – keyboard error. A complex combination of 1 long and 9 short signals indicates the impossibility of reading data from the disk drive.

So, this trouble happened - the laptop does not respond to the power button. What to do in such a situation? To begin with, it is worth determining two important points, namely at what stage of switching on the problem occurs. If nothing happens when you turn on the device - the monitor does not turn on, the cooler is silent, the indicators remain dark, then the hardware is responsible for the failure. Sometimes it happens that a failure is caused by such a trifle as a loose cable, lack of electricity or a broken socket. Therefore, the first step is to exclude these factors. There are several main reasons why a Samsung laptop does not turn on:

• The power supply is broken and the battery charge is exhausted;
• BIOS firmware is damaged;
• the contact in the power connector (laptop) or in the wire itself is faulty;
• the power button is broken and does not work;
• there was a short circuit in the internal power supply on the motherboard;
• The motherboard burned out.

Check the notebook battery, perhaps the battery has lost capacity over time and its charge is not enough even to turn on the device. To fix the problem, just connect the charger and continue using the gadget as a stationary device.

The laptop does not turn on, but the lights (LEDs) are on

If the indicators light up when you press the Power button, and the black screen still shows no signs of life, then the power supply is working, and the problem is hidden in another direction. Try turning off the power for a couple of minutes and then restarting. Sometimes this action helps to recharge the device. Similar behavior occurs when the RAM is faulty. To check why there is a hitch, you need to turn off the power to the Samsung laptop and try to remove the memory module from the slot, then insert it back. Has the picture changed? Urgently contact specialists who will carry out professional Samsung laptop repair . Repairing it yourself is unacceptable in the case of fragile electronics, since the slightest mistake can lead to big expenses. Until the purchase of a new device.

Advantages of service center services

The service center offers inexpensive repairs of portable devices with high-quality replacement of failed parts. No matter how complex the breakdown, qualified technicians will quickly restore the device using:

• original components with a quality mark from the manufacturer;
• branded instruments;
• modern diagnostic and repair equipment.

All information and contact details are contained on the company’s official website, where you can simply leave a request and receive a free consultation from a specialist. Especially for the comfort of clients, the dispatch service operates 24 hours a day, 7 days a week. Find out how to get a discount by ordering a call from the website or calling a phone number now. We value our reputation and maintain feedback from clients. The company has 15 branches in different cities of Russia, which indicates large-scale activities. Only here all customers are offered up to 3 years of warranty service for equipment.

To begin with, you need to clearly define the concepts. We can say that the laptop does not turn on if, in response to pressing the power button, no hardware processes start. That is, the car, as they say, shows no signs of life.

The indicator lights (with the possible exception of the battery indicator) don't light up, the cooler doesn't spin, you can't hear standard system signals when you turn it on, and the screen doesn't respond. In this case, we can say that the technical device is not working.

So, why won't my laptop turn on?

The most common reason is a power failure

For example, the lack of contact in the power button or in the power supply, including in the area of ​​the connectors, or due to a broken cord, makes it impossible to turn on. What to do if the laptop does not turn on? First of all, check the reliability of the connection and the functionality of the power supply.

The problem may also be caused by:

• BIOS firmware defects;
• failure of the power supply on the motherboard
• short circuit in the north or south bridges.

Almost all of these hardware failures can be fixed as soon as possible by the Notebook Center service center specialists. As our experience shows, attempts at self-repair usually do not bring the desired result and can completely destroy the car.

Sometimes the laptop does not turn on on battery power, and the battery may be the source of the problem.

Variants of this problem:

• the laptop does not work on the inserted battery;
• the battery caused a failure on the motherboard and the laptop does not work with or without the battery.

To diagnose and identify the problem in the second case, special equipment will be required.

Laptop won't turn on - black screen

Or rather, the machine tries to start, as the user sees and hears the operation of the hardware.

The indicators light up, the cooler turns on, the CaspLock and NumLock buttons light up and do not go out. But the screen remains black, and the indicator indicating that the hard drive is working does not start.

What could be the reasons?

• problems with the processor or memory;
• BIOS firmware defects;
• The north bridge of the laptop is broken.

If the main symptom is a black screen, then the reason most often lies in the laptop matrix inverter or a broken backlight.

In this case, as doctors would say, anamnesis is important. As a rule, these disturbances in the operation of the computer manifest themselves long before the “end of the world” occurs - this is flickering and uneven operation of the screen, noise, etc.

It happens that the machine starts to turn on, but attempts are interrupted at an early stage. It is likely that there is a problem with the BIOS initialization.

In the most extreme case, you may need to completely replace the laptop matrix.

BIOS problems

The BIOS initialization problem can be caused by various reasons:

• heating of the south bridge, which causes reboots
• If the processor is overheating, an important sign is that it turns off after various periods of time.
• a problem with power supply and a dead battery.
• And finally, the actual problem with the BIOS.

The fact is that the computer turns on because when power is supplied to the motherboard, a certain process of interaction between the hardware elements of the machine begins, the result of which is the loading of the operating system. After a full launch, the laptop comes under the control of the OS, however, in order for the operating system to start, it is necessary to trigger a set of program instructions that are stored directly on the motherboard chips.

Accordingly, problems with the BIOS lead to the fact that a Dell, Toshiba, Acer, or any other brand laptop, personal computer or tablet does not turn on, since they all use a similar startup principle.

Laptop freezes when turned on

What does it look like? The laptop does not turn on, but there are signs of some software starting up.

For example, a dark screen with a blinking cursor, or freezing on the splash screen when loading.

In this case, problems are likely:

• south bridge breakdown

In turn, the cause of problems with the hard drive may be lack of formatting, broken blocks, lack of connection, etc.

It is not so easy to identify the causes yourself and eliminate them. It is best to have your laptop diagnosed at a service center. Based on the identified causes of the technical problem, the specialist will offer an adequate solution.

Laptop won't turn on?

The hard drive may need to be replaced

Leave a request, we will conduct a free diagnosis and tell you for sure

SEND YOUR APPLICATION

Laptop won't turn on - problems with operating system

When a laptop won't start due to a software glitch, this is one of the simplest problems that can arise. Often the cause is the work of viruses, sometimes - accumulated failures of the operating system.

You can try to “treat” the computer, tinker with solving this problem on the existing OS.

The zero option in this case is to reinstall the system, which solves the accumulated problems in one fell swoop and radically.

Let's summarize

If the laptop does not turn on and you hear beeps (including uncharacteristic ones), unusual sounds, and there is no image on the screen, then the problem lies in the hardware and BIOS. Experts will help you determine the cause and correctly solve the problem.

If some signs of life are observed, that is, the download is interrupted at some stage, then the cause of the failure most likely lies in the state of the operating system or the failure of the hard drive. In this case, there may be problems with the screen backlight caused by a failure of the backlight or the laptop matrix inverter. In this case, replacement of elements and reinstallation of the operating system will be required.

We have presented a far from complete list of possible reasons why the laptop does not turn on or start.

Meanwhile, making an accurate diagnosis is the key to successfully eliminating a hardware or software malfunction.

If your laptop does not turn on, contact NotebookCenter. We will quickly determine the nature of the breakdown and qualitatively repair the gadget. You won’t even have time to get bored :)

If you came to this article, then you had to face a problem when the laptop does not turn on and a black screen appears. This is the most common problem associated with laptop hardware, or, to be more precise, with hardware settings.

We thank the laptop repair service FIXIT.BY (Minsk, Belarus) for their help in preparing this material.

Below we will look at how to reset hardware settings. This method helps when the hardware settings are lost, but it will not help if your laptop was flooded with water.

Resetting BIOS Settings

If the problem “the laptop does not turn on and a black screen appears” appeared after changing the BIOS settings, then you just need to reset and roll back to factory settings. This action is performed in several steps.

You can read more about the information “how to enter the BIOS on Windows 10” or “How to enter the BIOS on Windows 7” in our articles.

If these steps don't help, see the next step.

Reinstalling the RAM module

The image may also not be displayed due to incorrect installation of the memory module or problems with contacts (very often this method helps to get rid of the problem “the laptop does not turn on and a black screen appears” after water or moisture gets on it, but before that, make sure that your laptop completely dry and under no circumstances do not perform any actions if it is not dry).

To do this, you need to remove the RAM module and blow out the connectors.

— If you have one stick of RAM installed, and there are 2 slots available for it, just swap them.

Now let’s figure out how to remove RAM.