Sections of the site
Editor's Choice:
- Lenovo Vibe Z2 - Specifications
- Recovery: what is it and how to use it?
- Factory reset Sony Xperia XA Dual
- How to install the DHT Personalization app
- Firmware for UMI smartphones via ROOTJOY Umi Rome X on Aliexpress: sales, discounts, promotions
- What is an Internet questionnaire?
- How to update Dell BIOS without battery (Successfully)
- Windows XP Installation Instructions
- Entering safe mode through "System Configuration"
- Troubleshooting Mouse Problems
Advertising
The printer does not print multiple copies of the same document. The printer prints one page, prints one copy at a time. The hp 1320 printer prints one page at a time. |
Office equipment users often encounter this type of problem: the printer only prints one copy. Those. in such a situation, no matter how many copies you install, the device will print only one copy of the document. Of course, if the printer does not print normally, you can resort to the services of professionals, but it is better to save money and try to find and eliminate the cause yourself. In addition, it will make you more experienced in operating your own office equipment. So, if the device does not print multiple copies, then the problem may be that your device’s settings have a default mode called “Mopier”. It is a mode that allows you to reduce all network traffic by sending to the device, instead of several copies, only one copy with a specified number of prints. But it should be noted that for this purpose, the printing device must have a certain memory that will allow it to store such tasks. But most printer models do not have it, and this is the reason why the printer prints only one page. To bring the device back to normal, open its properties and click on “off” next to the “Mopier” mode. In addition, if the printer prints only one copy instead of multiple copies, then a possible solution to this problem may lie in the need to change the print handler. To do this, open the properties of your printer again and go to the “Advanced” tab. There, change the model of your device, for example, HP to Microsoft. After this, the problem should disappear. But if the printer still prints only one page, then you can try reinstalling your device’s drivers - but this approach is unlikely to help solve the problem, but it’s still not torture. The source of the problem could also be a registry entry, i.e. such a “glitch” is associated with the operating system installed on the PC. The fact is that the default driver settings set a certain number of copies - this value must be written in the OS registry. Because the seal has always been “by default”, then correct the unit indicated there to any other number. As a result of this action, the key will be changed in the registry, after which correct the value in the driver settings back to one. Thanks to this simple approach, the problem associated with the printer printing only one copy will be solved.
Sometimes all you need to do to solve a problem is add a blank page at the end of the document. In addition, it is advisable to update the driver of your device. Thus, with a competent and responsible approach, eliminating the problem described above is not as difficult as it might seem at first glance. In any case, you can resort to the services of professionals.
I encountered a problem that the HP printer prints only one copy of a page, no matter how many copies are set in the settings when sending for printing. It seems that the field with the setting that indicates the number of copies of the document is simply ignored by the printer (or its driver). The printer uses the latest available version of the HP Universal Driver, downloaded from the manufacturer's website, so there was no point in updating the printer driver. Mopier modeIf you open the content .prn file that the printer generates when sending for printing, in the print settings you can see the following useful information (highlighted in yellow). @PJL SET QTY=2 number of copies After searching the HP forums, I discovered that the problem may be related to the mode enabled in the driver Mopier(stands for multiple original copy). This mode involves reducing traffic between the computer and the printer, when when printing several copies of pages, only one copy of the job and the QTY parameter are transferred to the printer, indicating how many times this job should be printed. But there is one thing here BUT. For this mode to work correctly, the printer must have sufficient internal memory or hard disk space to store the job. Many younger models of HP printers (HP LaserJet 1160, HP 1200, HP 1320 and others) simply do not have such memory or there is not enough of it. Therefore, the received job is immediately printed as soon as the page is received from the computer, and the printer cannot print it again from its memory. Disabling Mopier mode on an HP printerIn this case, you need to disable Mopier mode.
After this, when sending several copies for printing, several identical jobs will be generated and sent over the network. If your printer has an internal hard drive installed, but jobs from the local cache are not sent for printing when Mopier mode is enabled, in the same section of the printer settings, check whether the option is disabled: Printer Hard disk(Memory device) - Not installed(Not installed) Turn it on. Changing the printer print processorIf disabling Mopier mode does not solve the problem of printing only one copy of a page, try changing the printer's print handler. For this:
Today I’ll tell you about another puzzle with Windows 7 and Microsoft Office 2013. Although this problem is often observed not only in the office, but also in other applications where there is printing. A user contacted me with the following problem: The printer does not print more than one copy, no matter how many are specified in the print parameters . For example, in Word: In other words, the printer ignores the number of copies or the printer prints only one copy (one copy). This is application independent. The number of copies is ignored both in MS Office (Word, Excel), and in notepad, CorelDraw, WordPad, OpenOffice, LibreOffice, in browsers and in general in any Windows applications. Cause:This is not a software bug, but a problem with a specific printer and is caused by the “Mopier” mode enabled by default.
Many printer models do not have enough memory to enable Mopier mode and therefore only print one copy. Solution:Disable the “Mopier” mode in the printer properties: Printer -> “Printer Properties” -> “Device Settings” tab -> in the settings tree, open “Installed Add-ons” -> opposite the “Mopier Mode” parameter -> select the value “Off” - > and save the changes made: I tested this method of solving the problem on an HP LaserJet 1320 printer. Today I will write about a problem that I personally encountered not long ago, namely: the printer prints one page, it ignores the number of specified copies to print and prints only one. In this case, the problem occurred with the HP 1320 printer, but it can occur not only with models and devices from this manufacturer. Usually in this situation the user begins to delve into the settings of the program from where printing is done; reinstall drivers, etc. If he is not very knowledgeable about computer technology, then he calls professionals who are not shy about taking “decent” payment for their work. However, you can easily avoid losing your nerves and money and use my instructions. After this, your printer will stop printing one page or copy at a time and will continue to work fully. The method for fixing the problem is extremely simple; even an untrained user can use it. If the problem does not go away, you can use more complex methods to resolve the error at the end of the article. The printer only prints one pageSo, if we start to understand our problem, when the printer only prints one copy. There are several solutions to resolve this error. I will start with the most obvious and simple ones, and if this does not help you, then you can try to fix the problem in less obvious ways, which I will also talk about. Changing the printer print processorMost often, it is enough to change the printer’s print processor so that our printer starts printing the entire document again and stops ignoring the number of specified copies. How to change the printer's print processor? ![]() After this, the problem should disappear. If the error remains, proceed to the next step. Disabling Mopier modeIf your printer does not print multiple copies and only prints one page, then quite often this is due to the fact that the “Mopier” mode is enabled in the settings of your device. What is this mode and why is it used? Mopier mode reduces the amount of network traffic between your computer and printer. Thus, the computer does not send each copy of your document to the printer separately (for example, if you have 100 copies specified, then each copy is sent to the printer as a separate “file”), but sends one copy of the document and “indicates” the required number of copies. However, such a document ultimately takes up quite a large space in the memory of the printing device, and sometimes the printer or MFP may simply not have enough memory. In this case The printer only prints one page of the document, and ignores the rest. In this case, you need to disable this mode How to disable Mopier mode? ![]()
It was this method that helped me cope with the problem that arose. Many older printers suffer from having a small amount of memory and therefore cannot print “voluminous” documents with a large number of copies with the “Mopier” mode enabled. Also, this error may appear if you are using a print server (as in my case) Clearing the printer's print queueIf the previous methods did not help you and your printer is still printing one page at a time, you can try clearing the printer's print queue. Usually it is located along this path: %windir%\System32\spool\printers i.e. this is usually the way C:\WINDOWS\System32\spool You need to go into the folder and delete all files from it. In addition, you can download a bat file, which will clear the printer's print queue. You just need to run it as an administrator and it will do the job for you. Removing the printer and installing a new driverSo, is the printer still printing one copy at a time? Try removing the printer from the Control Panel and installing the latest driver.
Can't print multiple copies from WordIn addition to the methods listed, here are a few more tips that Microsoft gives if you only manage to print one copy at a time from Office Word. I explained in the text above how to access the printer driver properties.
So, today we learned several ways to get rid of the error when the printer prints only one page, prints one copy. I hope that my article helped you get rid of this problem. |
New
- Recovery: what is it and how to use it?
- Factory reset Sony Xperia XA Dual
- How to install the DHT Personalization app
- Firmware for UMI smartphones via ROOTJOY Umi Rome X on Aliexpress: sales, discounts, promotions
- What is an Internet questionnaire?
- How to update Dell BIOS without battery (Successfully)
- Windows XP Installation Instructions
- Entering safe mode through "System Configuration"
- Troubleshooting Mouse Problems
- Speeding up your laptop