Articles and Lifehacks

Official firmware for Samsung s5250 is released with enviable frequency, but there are situations when the latest releases are released for other countries.

For example, firmware S5250XXLD1 (VALUE PACK) was originally released for Romania, but it contains Russian.

Well, and, accordingly, those who are in a hurry can take a risk and install this version for themselves, and then, using the Kies Registry Patcher program, remake the smartphone for their region, for example, for Russia.

But in most cases there is no need to do such things, since for the CIS countries and their European brothers with Slavic roots, the firmware is updated with normal frequency.

Download official firmware you can from the main Samsung website. Before updating the firmware, it is recommended to do backup data... just in case of emergency.

What is needed for firmware

In order to new firmware turned out to be in your smartphone, you need to thoroughly prepare.

Download the fifth version of the MultiLoader program, for example - MultiLoader_v5.64_BCOM. Download Samsung KIES and latest firmware. Also you will need USB cable and, of course, a computer.

Step-by-step instruction

1. Launch MultiLoader, select “BRCM2133” at the top. Check the “Boot Changer” checkbox and then check the “Full Downlod” checkbox. Click the “Boot” button and specify the path to the BOOTFILES folder, which is located in the latest firmware.
2. Then specify the path to all firmware files, each must correspond to a specific program field. Turn off your smartphone and then press the “Camera” button, the “Volume Up” button and the “On” button. - “Download” should appear on the screen.
3. Connect your phone to the computer with a cable, in the MultiLoader program you need to click “Port Search”, after your phone is found, select the port on which it hangs.
4. Then in the MultiLoader program, click the “Download” button. The smartphone firmware process should start.
5. After its successful completion, the phone will automatically reboot and turn on. This means that you can turn it off and your computer and start using it.

Update firmware version Samsung phone Wave 525 is possible by yourself, but keep in mind that this must be done carefully, following the instructions. The slightest inaccuracy, and the wave 525 firmware can end in failure both for the phone and for its owner! The link where you can download the firmware is given in paragraph “ The necessary conditions firmware". For those who are uncomfortable using step-by-step text instructions, at the end of the article there is a video on flashing the phone’s firmware.

Necessary conditions for firmware

Before you start updating the firmware on your smartphone, you need to make sure that:

• Samsung Wave 525 battery is fully charged
• a MicroUSB cable has been prepared for connecting to a computer
• MultiLoader application downloaded to computer
• Samsung Wave 525 Bada firmware downloaded, for example, from here
• drivers installed

Firmware process

If you have done all of the above, you can proceed directly to updating the wave 525 firmware.

Step-by-step process instructions:

1. Turn your phone into download mode (DOWNLOAD). To do this, hold down the “power”, “volume up”, “camera” buttons on your phone.
2. Turn on the MultiLoader program on your computer
3. IN open application opposite the buttons BRCM2133;Boot Change;Full Download, check the boxes
4. At the next stage, you need to select the files with the firmware. The table below identifies the buttons and their corresponding files or folders

1. You need to enter the phone into DOWNLOAD mode and connect it to the computer. First of all, decide on the com port. Then click on the Port Search button, the message should appear on the screen. If there is no sign, make sure that all drivers on your computer for connecting the phone are installed correctly. After the message appears, click the Download button.
2. The software update process has started, wait a few minutes until the application itself installs the necessary files on your phone
3. After you restart your phone, you can disconnect it from your computer.

Hello, today I will show you how to flash, aka Wave 525, there is nothing complicated about it. Every time I write a post about Samsung, I always try to first update the device’s software via kies and write about it, but nothing always comes of this idea, there are some errors, then the model is not supported, or everything freezes.

In short, I have never been able to update properly over the Internet.

Although this service was designed to make life easier for end users. Often, they bring devices that have stopped turning on after an unsuccessful software update procedure via the Internet.

But in fairness, I’ll say that for the most part, the user himself is to blame for this - either the computer rebooted during the process, or the Internet was turned off, or they didn’t wait for completion and pulled out the cable... But oh well.

So, what about WAVE 525- this is another badafone from the low-budget segment touchscreen smartphones. There was a time when this device was brought in “packs” due to the fact that during use it at one point stopped turning on, namely, it began to load until the splash screen and turned off, and so on in a circle. This is a firmware bug. Our device is no exception. So let's get started...

ATTENTION!!! Before starting software updates, rooting, resetting settings and other manipulations with your own or, God forbid, someone else’s device HIGHLY RECOMMEND read this one. In short, you have been warned and don’t say later that this is the first time you’ve heard this.

Samsung GT-S5250 software update.

For the firmware we need the following:

• A device with a charged battery;

• MicroUSB cable included;

• Firmware - XEKJ3 regular or S525WXEKJ1, if you have LaFleur(S5250W);

• Stitcher - MultiLoader_v5.64_BCOM;

• Drivers - install kies (when updating the software, do not run this application) or try installing;

• Computer - I, as usual, used an office computer on WINXP SP3;

• Time - 10 minutes for everything))).

Before you begin, save all important information from the phone to alternative data storage sources (if this is possible, of course).

Step 1:Enter the phone into DOWNLOAD mode by holding down the following buttons on the device in turn - camera button + volume down button + power button.

Step 2:Launch the MultiLoader_v5.64_BCOM application.

Step 3:This is what a running flasher looks like.

Step 4:Click the Boot button and select the BOOTFILES folder from the folder with our firmware.

Step 5:Click the Apps button and select the apps_compressed.bin file from the folder with our firmware.

Step 6:Click the Rsrc1 button and select the Rsrc_S5250_Open_Europe_Slav_Navi.rc1 file from the firmware folder.

Step 7:Click the Rsrc2 button and select the Rsrc2_S5250(Low).rc2 file from the firmware folder.

Step 8:Click the Factory FS button and select the file FactoryFs_S5250_Open_Europe_Slav_Navi.ffs from the firmware folder.

Step 9:Click the CSC button and select the file CSC_S5250_Open_Europe_Slav_Navi.csc from the firmware folder.

Step 10:Click the SHP APP button and select the ShpApp.app file from the firmware folder.

Step 11:Set all settings as shown in the picture above. Put your phone into download mode and connect the cable to your computer. First, the com port must be determined (387 in my case). Then press the Port Search button - the message should appear - The phone will be detected by the flasher only if the drivers are installed normally in the system. That's it. Now feel free to click on the Download button. The software update process will begin.

Step 13:The firmware is completed. The phone will be configured and it will turn on.

Step 14:Check the current software version by typing the following code *#1234# on your phone keypad.

Pre-Configuration Samsung GT-S5250.

Now we need to do the preconfiguration of our phone - the setup I talked about. I tried to make a video of the preconfiguration, but it doesn’t seem to work very well for me, so don’t scold me too much)))

Explanations for the video:
First enter the following code on your phone - *#5239870*#
Select pre-configuration
Enter another code *#27236*# in the Operator Code section and click Yes
Select SER region- For Russia
Save and exit
Next you need to reset the settings by entering the code *2767*3855# - the device will reboot

So we learned how to flash .

P.S. If you encounter any errors during the firmware process or the device does not want to be detected by the computer at all, read this. It describes typical problems and errors that novice users often encounter.

Firmware for phone S GTS5250 W 525. For firmware we need the following. Program for flashing phone 5250 Firmware for phone 5250 525 If you have. Everything for S GTS5250 games, themes. Android firmware for 525 5250. Operation diagram service center. What firmware should I install? S GTS5250 Firmware W 525. Firmware for S S5250 W 525. This section contains firmware for S S5250 W 2, which can be uploaded to the device using a cable

You should NOT flash this device at home. When you roll back, you will most likely fail the boot, restoring it will cost you a pretty penny FIRSTWARE S GT S5250 W 525 Firmware, RESTORATION. Software and firmware for S W S5250. Firmware 5250 525 firmware. Instructions for firmware S 5250 W 525 BO. Tired of reboots and freezes. detailed instructions by firmware mobile phone S GTS5250 W. F4 is a new service where all VK user files are collected in one place. But I never cook cheesecakes with flour.

Another modification of the already installed firmware on the phone. SM driver program LOOK AT OTHER REVIEWS. Firmware for S5250W modification. Welcome to F4! A new version firmware for S5250 S W 525 GTS5250 The phone is not killed by ML, but by crooked hands. Modified firmware V P W 525 under A. LOOK PEOPLE WHO CLICK ON ADVERTISING HELP VERY MUCH IN DEVELOPMENT. Firmware for phone S 5250 W 525)